ThermaCote® Products Perform!

Since 1985, Ther­ma­Cote®, Inc. has man­u­fac­tured what in its sim­plest def­i­n­i­tion is an “energy sav­ing paint”. Ther­ma­Cote® is a high per­for­mance Ther­mal Barrier/​ Weather Bar­rier which incor­po­rates ceramic tech­nol­ogy to pro­duce a fluid applied mate­r­ial which only weighs 5 lbs/​gallon, and is typ­i­cally applied at 15 mils per coat. When dry Ther­ma­Cote® looks just like flat latex paint, and con­serves energy! Ther­ma­Cote® is great for use as: Attic Heat Bar­rier, Com­mer­cial Build­ing Insu­la­tion, Metal Roof Insu­la­tion, Insu­lat­ing Roof Coat­ing, Pipe Heat Insu­la­tion, Steel Build­ing Insu­la­tion, Ther­mal Insu­lat­ing Coat­ing, Cor­ro­sion Pro­tec­tion and Con­trol, Con­den­sa­tion Con­trol, Heat Reten­tion, and many more appli­ca­tions!  The ver­sa­til­ity of Ther­ma­Cote® makes the pos­si­bil­i­ties endless.

ZERO VOC’s (Volatile Organic Com­pounds) in a water based acrylic for­mu­la­tion that is friendly to envi­ron­ments inside and out.

Lightweight:

At 5 pounds per gal­lon (<2.27 kilos per 3.78 liters) Ther­ma­Cote® is the orig­i­nal light­weight coat­ing (we pio­neered them in the mid 1980’s) and will only add approx­i­mately 6–12 lbs. a square when prop­erly applied to a roof or any other struc­ture that weight gain from pro­tec­tive coat­ings might become an issue.

Self-Priming:

The prod­uct con­tains built in rust/​corrosion inhibitors which make it self-​​priming unless deal­ing with harsh or large areas of rust. The lack of chlo­rides allows Ther­ma­Cote® to apply directly to stain­less steel with no pit­ting. Use Ther­ma­Cote® as the primer on new or old sheetrock for a room to room radi­ant bar­rier and air ceil­ing. Ther­ma­Cote® primes new or fresh blasted steel while at the same time adding radi­ant prop­er­ties against trans­mis­sion of hot or cold. Make Ther­ma­Cote® the first coat on new exte­rior con­crete and block walls for a never peel fin­ish that pro­vides paintable pro­tec­tion against U/​V and mois­ture pen­e­tra­tion. Sticks to plas­tic, glass, wood, all met­als, con­crete and masonry sur­faces, fiber­glass, Sty­ro­foam and foam prod­ucts, paper prod­ucts and almost any sur­face that is clean and dry!

Low Dry Fall Rate:

5–10 feet (depend­ing on temp and humid­ity) Ther­ma­Cote® will not travel far wet, reduc­ing over­spray and land­ing on sub­se­quent sub­strates as dust to be swept up.

Other Key Characteristics Include:

Vapor Bar­rier that breathes
Reduces Con­den­sa­tion
Low Shrink­age due to high vol­ume of solids. 12 wmt = 10dmt
High Solar Reflectance
High Emit­tance
Wide Range of Appli­ca­tion: 50f– 300f
Reduces Expan­sion and Con­trac­tion
Max White Bright­ness: Actu­ally hard to look at with­out sun­glasses in direct light.

Plus, we offer unpar­al­leled Cus­tomer Ser­vice. Check out what our cus­tomers have to say.

ThermaCote^® increases:

• Attic Energy Savings
• Residential Energy Conservation – Ther­ma­Cote® has con­sis­tently shown 20 to 30% kWh reduction.
• Commercial Energy Conservation – On com­mer­cial build­ing appli­ca­tions Ther­ma­Cote® is a way to eas­ily retro­fit and have energy effi­cient build­ings which help reduce car­bon production.
• Roof Insulation Indexes – as a roof coat­ing Ther­ma­Cote® min­i­mizes solar gain and radi­ant heat gain to com­mer­cial build­ings and residences.

ThermaCote^® – Insulation’s Best Friend

• Sig­nif­i­cantly Reduce Your Util­ity Bills.
• Enhance The Life Of Your Home Or Building.
• Reduce Or Elim­i­nate Ther­mal Bridging.
• Help to Seal The Enve­lope Of Your New Or Retro­fit Project.
• Make Your Cur­rent Insu­la­tion Work Closer To Its Rated “R” Value.

To engineers, it’s a com­mer­cial grade fluid applied ceramic insu­lat­ing coat­ing which has supe­rior per­for­mance as a radi­ant heat bar­rier, while pro­vid­ing excel­lent insu­lat­ing properties.

To consumers, it’s energy sav­ing paint that keeps win­ter warmth in while keep­ing sum­mer heat out.

To businesses, it’s an invest­ment in energy effi­ciency that starts pay­ing back as soon as the first coat is applied.

ThermaCote® has Virtually Zero VOC's

VOC’s (Volatile Organic Com­pounds) are the dan­ger­ous ele­ments that con­tin­u­ously evap­o­rate from reg­u­lar paint on inte­rior walls, ceil­ings and other sur­faces thereby con­t­a­m­i­nat­ing the air we breathe. Ther­ma­cote® has only 0.0099lbs/gallon!

↑ Grab this Head­line Animator